TRIKDIS GSM/GPRS Alarm Signal Transmitter G10T, Programmer, Universal SKU: TX-G10T

Description

TRIKDIS GSM/GPRS Alarm signal transmitter G10T, programmer, Universal

The G10 is the communication device used to transmit alarm messages
from the security system panel to a GSM signal receiving center.
• Compatible with the telephone communication device of the system board. security
• messages in the CLS can be transmitted through the GPRS connection, through a DTMF call or through SMS messages
• To increase the probability of successful message delivery, the G10 can transmit using the primary GSM communication channel and in case of failure, the secondary GSM channel can be used
• Even if GPRS communication with both servers is lost, information can be sent via SMS messages
• Alarm signals are transmitted using codes of the Ademco Contact ID protocol
• G10T can convert any alarm event into text and send SMS to 1-4 Phone numbers
• Supports English, Lithuanian, Estonian, Turkish, Greek, and Russian SMS Character Encoding New!
• Remote Setup and Upgrade
• Two levels of access to access the settings

• Laser-engraved aluminum packaging

Specifications:
Inputs (IN1): 1 x NC type
Connection with the main IP receiver: GPRS or SMS
Connection with the backup IP receiver: GPRS or SMS
Communication via GPRS: TCP/IP or UDP/IP protocol
Alarm messages encoding: in Contact ID
Alarm messaging to consumer: SMS with pre-set customized text to 4 mobile phones
Memory: 60 last events
GSM modem: Dual-Band 900/1800 MHz
Power supply: DC 12.6V, 10-15V
Current: Idle running 60 – 100 mA, within transmitting up to 250 mA
Operating temperature range: from -10 °C to +55 °C, when relative air humidity 80 % with 20 ?C
Dimensions: 85 x 65 x 25 mm
Weight: 0.1 kg